Self-leveling Concrete System
It is a polymer-modified engineered, low-alkali, self-leveling cement that is blended at the street using a state of the art Mobile Blending Unit that delivers a consistent, quality controlled underlayment used to finish new concrete and capping existing slabs.
- Unlike Portland-based products, SUPERCAP is a superior Calcium Aluminate product that is more stable, water repellant, requires less water to mix and has very low shrinkage properties.
- The Mobile Blending Unit mixes at the street level and pumps up to 40,000 s/f per day. It eliminates the need to haul heavy bags of cement to the project floor to mix on-site, tie up jobsite elevators, or clean up palettes, bags and dust afterwards.
- It is so fast drying with high compression rates that trades can be back at work the next day.
Yes. SUPERCAP eliminates waste and delivers time and cost savings to both capping the slab process and a halo effect on virtually all other interior trades following the slab cap. It delivers a flat floor surface that virtually eliminates the need for shimming.
Yes, SUPERCAP is Greenguard Gold certified, contributing to LEED v4. Each project is evaluated on amount of LEED v4 contribution. In addition, Supercap is pumped through the Mack Truck Green Diesel Clear Tech SCR System resulting in near-zero emissions. Since the concrete is mixed at the street, it produces zero silica dust contamination.
The Mobile Blending Unit can mix and pour up to the 25th floor without a booster pump, and up to the 50th floor with a booster pump.
Definitely. There are no unmixed materials entering the building which eliminates issues with vertical transportation (elevators) to bring cement bags to the floors, point load and silica dust. SUPERCAP helps meet OSHA’s increased silica dust protection requirements and also is ideal when used in occupied buildings.
SUPERCAP is guaranteed to exceed Division 3 and Division 9 flatness tolerances, virtually eliminating concrete deflection issues.
When used in combination with a correctly applied epoxy moisture barrier, the LATICRETE SUPERCAP System is engineered to effectively address high alkalinity and eliminate moisture mitigation problems. Allegheny will guarantee that, providing we are responsible for all of the floor prep and wear surface product and installation.
SUPERCAP can be walked on 2 to 4 hours after pouring and all trades can be back to work within 24 hours.
SUPERCAP weight ranges for 85 to 125 pounds per square foot, significantly lighter than Portland concrete at 140 pounds per square cubic foot.
There are no other options on the market that can compete with SUPERCAP’s speed and flat finish guarantee.
Competitors use traditional, manual, bag-barrel-mix or small pump methods. They cannot compete with SUPERCAP’s speed or volume. Traditional bag application requires approximately six workers producing 800 bags per day that self-levels 10,000 sf at ½” depth. In contrast, a six-person SUPERCAP crew using the Mobile Blending Unit will pour up to 40,000 sf per day at ½” depth.
No product or company on the market can apply an underlayment that finishes concrete at our speed and can guarantee the floor flatness. The direct and indirect savings - in time lost, hard costs and job site silica dust contamination and trash clean up - cannot be matched.
Every project is different with variables that must be considered before we can provide an accurate estimate. Simply ask us and we will be glad to provide you with an estimate on your specific project.